Start - Maruyama MS75 Manuel Du Propriétaire Et De L'utilisateur

Start

Start of engine
CAUTION
When starting the engine, make sure to put water
or chemicals into the chemical tank. Without
water or chemicals in the tank, the pump will break
down.
1
Perform priming.Push priming pump installed
in front of the carburetor (rear in the specifi-
cation with cell starter) several times slowly,
and confirm that fuel fills the priming pump
and returns to the tank.
English
2
Fully close the choke. (In hot weather or
when engine is hot, the choke should be
partly open or fully open.)
Close
3
Move throttle lever to medium-and low-
speed position.
4
Set handle of pressure control valve at
"Start" position.
17
Start