Handling And Operating Method; Assembly Of Nozzle - Maruyama MS75 Manuel Du Propriétaire Et De L'utilisateur

3. Handling and operating method

Assembly of nozzle and assembly of waist band

Assembly of nozzle

After confirming the existence of packing, securely tighten nozzle pipe to lever cock, and wide nozzle to
nozzle pipe. Tighten the screw securly after confirming the packing to make sure there is no water
leakage. Over-tightening will cause extrusion or break the packing. Correct tightening pressure is
important.
English
Wide nozzle
Discharge opening
Nozzle pipe
Lever cock Spraying hose assembly
15
Connect opposite side of hose to
discharge opening of the spraying
machine.