hestan GRS_24 Manuel D'installation page 11

Masquer les pouces Voir aussi pour GRS_24:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

DOOR INFORMATION
OVERLAY INSTALLATION
OVERLAY INSTALLATION
Before beginning installation, check all components for proper fit and finish.
NOTE: For more detailed installation information, please request or download document 028374
mentioned on the previous page.
For best performance and functionality, the overlay panels should be 3/4"
[19 mm] thick. The weight of the overlays should not exceed 20 lbs [9 kg]
for solid doors, 10 lbs [4.5 kg] for glass doors, or 10 lbs [4.5 kg] for drawer models.
1. With the unit secured in position, open the door, CAREFULLY remove the door gasket (it can
tear), and make sure panel pre-drilled holes align with door frame holes.
2. Loosely attach four corners of overlay panel to the door using #10 x 3/4" wood screws, installed
through the door frame from the rear.
3. Check the overall fit of the overlay panel, position, and function. Make minor adjustments as
necessary. When panel is properly aligned, tighten mounting screws securely. Install the rest of
the mounting screws and tighten securely.
4. Re-install the gasket making sure the dart is securely pressed inside the slot on the door frame.
Start at the four corners and firmly press your way inwards.
5. Verify that the gasket is fully seated onto the door frame when completed.
Do not overtighten overlay panel attachment screws, as this may damage
the factory supplied door frame.
WINE RACK TRIM (OPTIONAL)
WINE RACK TRIM (OPTIONAL)
All wine reserve racks come with sleek stainless steel fronts, which can be removed and replaced
with other wood to match your cabinetry. See Figure 6 for wine rack face details.
NOTE: The unfinished faces should be finished and sealed. In many cases, stains and / or finishes
have odors that may be objectionable in an enclosed area. Do not stain or finish wood faces while
installed on unit. To remove the front wood face from the wine shelf, simply pull out the wine shelf
and remove the fasteners, finish as desired, and reinstall when completely dry.
17
32 "
5
" DEEP
16
1
1-
2 "
(continued)
8
"
17
8-
32 "
5
18-
16 "
Figure 6. Wine Rack Trim
17
1
-
32 "
1
7
-
4 "
5
8 "
17
8
-
32 "
5
"
8
©2021 Hestan Commercial Corporation
EN
BREAK ALL
OUTSIDE EDGES
1
"
2
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Grg_24Grr24Grfr24Grws_24Grwg_24Grs 24 serie ... Afficher tout

Table des Matières