AKG Acoustics BALANCE K 122 IR Mode D'emploi page 11

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
Note: The charging function on the trans-
mitter will remain in standby mode so
you can charge battery packs at any
time.
9 What to Do if...
• ...the headphones remain silent:
- Switch power to your audio source on
and turn the volume control (6) on the
headphones up. If this does not help,
insert a fully charged battery pack into
the headphones.
- If the output level control on your
audio source is at zero, turn the out-
put level control up.
- Refer to fig. 4. Put the headphones on
making sure the volume control (6) will
be on your right.
- Refer to fig. 5. Go to a place where
you can see the transmitter front
panel.
• ...you hear unwanted noise (hiss) in
the headphones:
- Refer to fig. 5. Go to a place where
you can see the transmitter front
panel.
• ...the sound becomes quieter or
distorted:
- Refer to fig. 8: Replace the battery
pack in the headphones with the fully
charged replacement battery pack.
Insert the dead battery pack into one
of the charging slots. The battery
pack will be charged automatically.
BALANCE K 122 IR
10 Cleaning Ear Pads
Clogged ear pads may affect the sound
quality.
1. Remove the ear pads.
2. Wash the ear pads in sudsy water.
3. Allow the ear pads to dry completely
and replace them on the speaker cap-
sules.
11

Publicité

Table des Matières
loading

Table des Matières