Kohler Vanity Instructions D'installation page 12

7. Remove/Install the Drawer
Bottom of Drawer
Removal
Fully extend the drawer.
From underneath, press the release latches toward the sides of the drawer.
Lift the front of the drawer to disengage from the rails.
Reinstallation
Fully extend both rails.
Rest the back of the drawer onto the rails and align the rail hooks with the drawer
holes.
Rotate the front of the drawer down onto the rails, engaging the latches with the
rails.
Push the drawer closed to fully snap the latches into the rails and insert the rail
hooks into the drawer holes.
Lightly lift the front of the drawer to verify that the drawer is fully engaged with
both rails. If not engaged, repeat the "Reinstallation" procedure.
1216526-2-G
12
Screw
Hole
Rail
Kohler Co.