HQ Power PROCD330 Notice D'emploi page 7

16. B button
Press this button to determine the end of the loop.
17. PROGRAM button
Enter the program mode by pressing this button. The CD will stop playing.
18. RELOOP button
Start the last saved loop.
19. SINGLE/CONTINUE button
Switch between the single and continuous play modes.
• Rear Panel (fig. 4)
20. MAIN UNIT CONNECTION
Connect the control unit to the main unit through this connection using the included connection cord.
21. PLAY/PAUSE
Control the play function and the pause function through the control jack. Never apply any voltage to these
jacks.
c. LCD Display
1. BAR indicator
This bar indicator provides a visual
display of the approximate position in
the track.
2. ELAPSED time
Indicates the elapsed time.
3. REMAINING time
Indicates the remaining time.
4. TRACK number
Number of the current playing track.
5. MINUTE indicator
Time in minutes of the track being played.
6. SECONDS indicator
Time in seconds of the track being played.
7. FRAME indicator
Indicates the current track frame.
8. SINGLE indicator
When this indicator is displayed, playing will stop at the beginning of the next track.
9. CONTINUE indicator
When this indicator is displayed, playing will continue.
10. PITCH
BPM change rate (max. +/- 12%).
PROCD330_v4
7
VELLEMAN