HQ Power PROCD330 Notice D'emploi page 6

b. Control Unit
• Front Panel (fig. 3)
1. OPEN/CLOSE button
Press this button to open or to close the tray. The disc tray cannot be opened during play. Stop the disc
before pressing this button.
2. BACKWARD SKIP button (
Use this button to skip and go back to the beginning of the track.
3. +10 button
Press this button to skip 10 tracks.
4. FORWARD SKIP button (
Use this button to skip to the next track.
5. LCD
6. TIME button
Press this button to switch between the ELAPSED time and the REMAINING time display mode.
7. PITCH button
Press this button to enable or disable the BPM adjustment.
8. PITCH BEND + button
Hold this button pressed to speed up the playing CD. Release the button to return to the original speed.
9. PITCH BEND – button
Hold this button pressed to slow down the playing CD. Release the button to return to the original speed.
10. PITCH slider
Adjust the CD's pitch. Slide up to decrease; slide down to increase the pitch
11. JOG & SHUTTLE wheels
JOG: In pause mode, if you turn the jog, the point at which the sound is being produced moves by a
number of frames corresponding to the number of clicks. Clockwise moves the point forward, counter
clockwise moves the point backwards. In play mode, the jog increases or decreases the speed of the
song (clockwise: increase, counter clockwise: decrease).
SHUTTLE: In play mode, turn to scan.
12. CUE button
Press the CUE button in play mode to return to the start position.
13. PLAY/PAUSE button
Use this button to start playing or pausing.
14. A button
Press this button to determine the beginning of the loop.
15. REPEAT button
Repeat one track or all tracks.
PROCD330_v4
)
)
6
VELLEMAN