Alarm Options; Digital Radio (Dab/Dab + /Dmb) Mode - Tivoli Audio PAL+ Manuel Du Propriétaire

Your settings will not be saved unless you complete the entire process and the display
shows "Alarm Saved".
IMPORTANT NOTES:
• The alarm cannot sound if the PAL + is off and not connected to the external adapter.
• The alarm volume will ramp-up over time. It will take several seconds until the
alarm reaches the volume level set in the alarm menu.
• Should power be lost or the battery becomes discharged, the alarm time will be
saved, but the alarm cannot sound without power to the PAL + .

ALARM OPTIONS:

Alarm Quick Set: With the PAL + in standby, repeatedly press the alarm button briefly to
toggle each alarm on or off.
Alarm Off: To stop the alarm, press the Alarm or Power button on the remote, or press and
hold the Multi-Function Control Wheel on top of the unit.
Snooze: To activate Snooze, press the Snooze button on the remote, or briefly press the
Multi-Function Control Wheel on top of the unit. The Snooze time is not adjustable. When
operating on battery-only power, pressing Snooze will have no effect.
Note: When in Snooze mode, you can see the remaining Snooze time by pressing the
Snooze button on the remote. If you press the Alarm or Power button on the remote,
or if you press and hold the Multi-Function Control Wheel on top of the unit, then
the Snooze countdown will be cancelled and the PAL + will go into Standby or off if
operating on battery-only power.

Digital Radio (DAB/DAB + /DMB) Mode

STATION LIST: Use the pq buttons on the remote, or press the Multi-Function Control
Wheel on top of the unit, to show all available DAB/DAB + /DMB stations. Use the pq
buttons to highlight a specific station and the Select button to tune that station. The Station
list will disappear between 7 and 15 seconds depending on whether it was accessed via
the top Control Wheel or the remote control.
Press and hold the Menu button on the remote to enter the main menu. Use the pq
buttons and the Select button to change the items within the menu. Use the Back
button to navigate back, or wait for 15 seconds until the timeout expires.
An asterisk (*) indicates the shown menu item is currently set.
Note: Upon entering Digital radio mode, if the Station list is empty, an auto scan will
initiate.
1. AUTO SCAN: Searches the entire frequency range. If you move the PAL + to another
location, you must perform a new scan so the radio will find stations in the new location.
To cancel the auto scan, press the Back button on remote.
2. TIVOLI EQ: Please refer to the section marked "Menu and Specific Features".
3. MANUAL TUNE: Press the pq buttons to manually tune specific DAB/DAB + /DMB
frequencies, then press Select to tune the displayed frequency.
14 – ENGLISH