Cequent Performance Products 75784 Instructions D'installation

Hitch Shown In Proper Position
Equipment Required:
Fastener Kit: 75784F
Wrenches: ¾, 19mm
Drill Bits: None
Hitch crosstube
Gently pull down and rearward at fascia attachment for
additional clearance if needed at crosstube.
Do Not distort Fascia
j
Qty. (2) Hex bolt ½-13 x 1.75 GR5
k
Qty. (4) ½ Conical Toothed Washer
1. Raise hitch into position and align the slots of the receiver with the weldnuts in the frame rail.
2. Install the M12 X 1.25 X 40mm bolts and conical toothed wash er through the hitch and into the weldnuts.
3. Insert the handle nuts through the large hole in the vehicle frame rail as shown above.
4. Install the ½-13 X 1.75 bolts and conical toothed washers.
Tighten all M12 X 1.25 CL 10.9 fasteners with torque wrench to 115 Lb.-Ft. (156 N*M)
Installation Instructions
Fascia
Frame Rail
Fascia attachment
bracket
Bottom of
Fascia
Tighten all 1/2-13 GR 5 fasteners with torque wrench to 50 Lb.-Ft. (68 N*M)
Acura RDX
Do Not Exceed Lower of Towing Vehicle
Manufacturer's Rating or
Hitch type
Weight Distributing
Weight Carrying
Ball Mount
m
Wiring Access Location: SUV1, 2
l
Qty. (2)
m
Qty. (2)
Max Gross
Trailer WT (LB)
Not For Use With Spring Bars
4000 (1816 Kg)
Note: Fasteners typical
both sides
Existing Weldnut
– Both Sides
k
l
M12 X 1.25 X 40mm CL 10.9
½ Handle Nut
Part Numbers:
75784
87642
44695
75190
U-Haul
Max Tongue
WT (LB)
400 (182 Kg)
m
k
j