Selector Switch; Oven Light; Abnormal Operation - Summit SGWO30SS Mode D'emploi

Signal Frequency:
If no function is activated, the signal frequency can be selected by pressing the "-" button. Three
different frequencies are selectable.

Selector Switch

This control allows you to turn on the Oven Internal Light or Oven Forced Air Convection Fan for
cooking or defrosting purposes. See fig. 05.
OVEN LIGHT: Use this setting to turn on oven light. Light also remains on in all other
modes.
FORCED AIR CONVECTION FAN OR DEFROST: Use this setting when forced air
convection is necessary for a more even cooking finish. Also, use this setting to defrost
frozen food by speeding up air circulation.
Caution
1. Do not store or use gasoline or other flammable vapors, liquids or items in the vicinity of this or
any other appliance.
2. Never use the appliance as a space heater to heat or warm a room.
3. Do not obstruct the flow of combustion and ventilation air by blocking the room vents or air
intakes. Restriction of air flow to the gas appliance prevents proper performance and increases
carbon monoxide emission to unsafe levels.
4. Continuous use of the appliance may require extra ventilation. This can be accomplished by
opening a window or increasing exhaust power of a cooking hood.
5. If flame should go out during operation, turn the burner off. If a strong gas order is detected,
open a window and wait five minutes before relighting the burner.
6. Be sure all control knobs are set in the OFF position prior to supplying gas to the oven.

Abnormal Operation

Any of the following are considered to be abnormal and may require servicing:
•
A burner flame with yellow tips or that is noisy means the air/gas mixture maybe incorrect.
Contact a service technician to adjust.
•
Difficult burner ignition
•
Burners fail to remain lighted
•
Burner flames out
•
Difficulty turning gas valves
.
13