Flotec FPDC30 Notice D'utilisation page 13

Charger/Controller LED Display
NOTE: When the System Alert light IS NOT flashing, refer to Table II. When the System Alert light
IS flashing, refer to Table IV.
TABLE IV – Error Code Displays (LEDs Flashing)
TABLE V – Control Button Functions
Control Button: Result of Pushing Button:
System Test Pump starts and all LEDs light up.
Will reset the 'PUMP ACTIVITY' LED.
When pushed with the 'SILENCE ALARM' button, the Charger/Controller microprocessor resets
and error code resets.
Silence Alarm Toggle; Prevents the audible alarm sounding. Press and release to reset.
Light Toggles the light on the Charger/Controller on and off.
System Reset Press and release 'TEST SYSTEM' and 'SILENCE ALARM' to reset system.
13