Table des Matières
Publicité
4. Press the mode button (8). The display now shows "CAL". When
the calculation is completed, the respective number of pieces
(quantity) is shown in the display.
5. N ow place the complete quantity of the material you want to
count onto the weighing plate. The display now shows the num-
ber of pieces.
Switching off the Scales
Switch off the scales by pressing the on/off button (4). The scales
are also equipped with an "auto shut-off function" to save battery. It
switches the scales off automatically after 4 minutes.
Handling
N ever turn on the scales immediately after they have has been
brought from a cold into a warm room. Condensation water might
destroy your scales. Let it reach room temperature before you
switch it on. Wait until the condensation water has evaporated.
Make sure that the connection of the adapter has been done prop-
erly and in accordance with the manufacturer's instructions.
Do not operate the adapter together with the scales in rooms with
adverse environmental conditions where there are or could be dust
and inflammable gases or vapours. For your own safety, you should
absolutely avoid he scales getting wet or damp.
The adapter must never be plugged or unplugged with wet hands.
Always pull the plug before cleaning the scales or when they are not
in use.
24
Operating Elements
12
11
10
1
Weighing plate
2
Socket for external power supply
3
Battery compartment
4
On/off button
5
PCS button
6
Level bubble
7
Tare/zero button
8
Mode button
9 eight
display
10 Zero display
11 Minus sign for "negative" weight
12 Low bat(tery) display
1
9
8
7
6
2
3
4
5
17
Publicité
Table des Matières
