Korona 24300 Manuel D'instructions page 29

• Remove the mixing unit/travel jug (1) from the motor block
(4) and empty it.
• Immediately after use, fill the mixing unit/travel cup (1)
with water ( not more than 250 ml), and add a bit of
dishwashing detergent.
• Screw the blade assembly (3) properly onto the mixing
unit (1) and attach the assembled unit to the motor block
(4).
• Switch to P-position (Auto-Clean Function) for a few
seconds.
• Afterwards, remove the assembled mixing unit/travel cup
(1) and rinse both, mixing unit and blade assembly with
clear water and dry them thoroughly.
Mixing unit / travel cup (1) and travel cup lid (2) can also
be cleaned in the dishwasher.
Make sure, never to immerse the blade assembly (3)
into water. The blade assembly is not dishwasher safe!
Cleaning and user maintenance shall not be made
by children without supervision.
the cutting blade is extremely sharp. Risk of injury!
After use, store the appliance in a clean and dry place and
keep it out of the reach of
Instruction Manual
children.
ENGLISH
29