MSI MPG B650 CARBON WIFI Manuel D'utilisation page 51

Onboard LEDs
EZ Debug LED
These LEDs indicate the debug status of the motherboard.
LED_SW1: EZ LED Control
This switch is used to switch on/ off all the LEDs of motherboard.
JPWRLED1: LED power input
This connector is used by retailers to demonstrate onboard LED lights.
CPU - indicates CPU is not detected or fail.
DRAM - indicates DRAM is not detected or fail.
VGA - indicates GPU is not detected or fail.
BOOT - indicates the booting device is not detected or fail.
LED_OFF
LED_SW1
JPWRLED1 - LED power input
49
LED_ON
(Default)