Change Feed Dog Settings - Texi Integra 5 Mode D'emploi

CHANGE FEED DOG SETTINGS

Standard hem stitching,
set change feed dog in "S"
position.
NOTE: TURN OFF THE POWER.
Remove cloth waste box, turn
trimming width adjustment
knob (adjust range between 3.0-
4.5 mm).
Texi Integra 5 INSTRUKCJA 2019-ALL.indb 103 Texi Integra 5 INSTRUKCJA 2019-ALL.indb 103
When change feed dog
is in the "S" position,
the tongue "A" is in this
position. This setting can
be used for all standard
hem stitching.
When change feed dog is in the "R" position, the
tongue "A" is in this position. This setting can be used
for all curl hem stitching.
is opened, it is easier to adjust the trimming
width.
Texi Integra 5
EN
Curl hem stitching & cover
stitch sewing, set change
feed dog in "R" position.
The width of the
adjustment is
marked on the
Needle plate,
"R" indicates the
trimming width at
curl hem stitching.
Note: If the
looper cover
103
18.09.2020 10:39 18.09.2020 10:39