List Of Components - Inglesina standup Manuel D'instructions

environments since mildew may form.
Store the product in a dry place.
Protect the product against atmospheric
agents, water, rain or snow; moreover,
continuous and prolonged exposure
to sunlight may cause changes in the
colour of many materials.
Clean the plastic and metal parts with a
wet cloth or with a mild detergent; do

LIST OF COMPONENTS

fig. 1
A Main Support
B Right side support foot
C Left side support foot
ASSEMBLING SEQUENCE
fig. 2 Open the main support (A) un-
til you hear a CLICK.
fig. 3 Insert the right side support
foot (B) on the main support matching
leg.
12
WARNING
not use solvents, ammonia or benzine.
Carefully dry metal parts after any
contact with water in order to avoid the
formation of rust.
Keep all moving parts cleaned and, if
necessary, lubricate the same with light
oil.
Keep the wheel cleaned removing any
presence of dust and/or sand.
INSTRUCTIONS
fig. 4
of the right side support foot (B) on the
main support push simultaneously both
the metal pins (D).
fig. 5
the left side support foot (C) also and
the Stand Up will be mounted.
fig. 6
red button (E) and close it.
To complete the attachment
Make the same operations for
To fold the Stand Up push the