Hilti NURON SF 4-22 Mode D'emploi page 27

Li-ion battery
Screwdriving
Drilling
Hammer-action drilling
Forward / reverse
Diameter
The product supports near-field communication (NFC) technology
compatible with iOS and Android platforms.
Never use the battery as a striking tool.
Do not drop the battery. Never use a battery that has suffered an
impact or is damaged in any other way.
1.4 Product information
products are designed for professional users and only trained,
authorized personnel are permitted to operate, service and maintain the
products. This personnel must be specifically informed about the possible
hazards. The product and its ancillary equipment can present hazards if
used incorrectly by untrained personnel or if used not in accordance with
the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to
state the product details when contacting Hilti Service or your local Hilti
organization to inquire about the product.
Product information
Drill / driver | hammer drill / driver SF 4-22 | SF 4 H-22
Generation:
Serial no.:
1.5 Declaration of conformity
The manufacturer declares, on his sole responsibility, that the product
described here complies with the applicable legislation and standards. A
copy of the declaration of conformity can be found at the end of this
documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | D-
86916 Kaufering, Germany
*2272252*
02
2272252 English 23