T-Set; Test - MACHEREY-NAGEL NANOCOLOR VARIO Mini Manuel

6.5 T-Set

is for control and calibration of the temperatures in the NANOCOLOR
The menu
VARIO Mini. Via the
nection of the NANOCOLOR
confirming with .
Note: Some features of this menu are only available in combination with the
NANOCOLOR USB T-Set (REF 919921) and the associated adaptor (REF 919937). The
®
NANOCOLOR RS 232 T-Set (REF 919917) cannot be used with the NANOCOLOR
®
VARIO Mini.

6.5.1 TEST

In the menu , the correctness of the temperatures in the heating block can be
checked with the help of the NANOCOLOR
heating block is higher than 70 °C the test program starts as soon as the heating block
has cooled down to less than 70 °C. After calling up the test program, the current date
needs to be entered. The date can be entered via the buttons
and (one digit to the right). For the correction of one digit of the date, the button
can be used multiple times to get to this digit. After confirmation with
which are programmed in the heating block, are measured, registered and saved in the
heating block (duration up to 40 min). This process starts with the lowest temperature
and ends with the highest. During this process, a progress bar is displayed and you can
see the icon blinking (Note: heating block is heating). This process can be stopped
at any time by pushing the
and question mark. Without further confirmation, the testing process is continued. The
message " " is displayed after successful verification of the temperature. Confirming
with saves the test data. In case of an unsuccessful testing process the message
" " appears. Confirming with
Note: In case of deviations during testing it is suggested to calibrate the heating block
with the help of the NANOCOLOR
deviations please check the correct positioning of the NANOCOLOR
and buttons the desired action can be selected. After con-
USB T-Set the options
®
button followed by confirming the alternately blinking
saves the test dates.
USB T-Sets (see chapter 6.5.2 CAL). For larger
®
NANOCOLOR VARIO Mini V 1.0 / 01.16
®
and
USB T-Set. If the temperature inside the
®
can be called up by
(next higher number)
all temperatures
® USB T-Set.
29
®
®