Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Setting of the display
4 options can be selected:
°C = display in °Celsius
°F = display in °Fahrenheit
r°C = display in °Celsius (inverted)
r°F = display in °Fahrenheit (inverted)
Select the display unit before setting the switch points (SPx,
rPx). This avoids rounding errors generated internally during the
conversion of the units and enables exact setting of the values.
Units are delivered from the factory with dis = °C
Calibration offset
The internal measured value (operating value of the sensor) is
offset against the real measured value.
°C
Min-Max memory for system temperature
• Hi: displays the highest measured temperature
• Lo: displays the lowest measured temperature
Erase the memory:
- Press the "Mode/Enter" button until HI or Lo is displayed.
- Press the "Set" button and keep it pressed until "- - -"
is displayed.
- Then press the "Mode/Enter" button briefly.
It is recommended to erase the memory as soon as the unit
starts working under normal operating conditions.
20
All manuals and user guides at all-guides.com
°F
setting range
-9.9 ... +9.9
-17.5 ... +17.5
in steps of
0.1
0.5
Publicité
Table des Matières
