Table des Matières
Publicité
Battery charging and maintenance:
Charge the battery in a dry environment to avoid short-circuit damage.
Charge the battery to at least 60% of capacity once every 3 months even when the bicycle is not used.
Do not cover the battery or the charger.
Do not leave the battery constantly connected to the power source.
Use the charger only to charge the battery.
Do not use the battery for other appliances. It has been made specifically for this model.
Do not disassemble or modify the battery pack.
Do not throw the battery into fire or expose it to extreme temperatures.
Recharging time from zero to 100 % is 4-6 hours.
If the battery is not charged after 6 hours, disconnect the battery and abort charging. The battery may
overheat, crack or ignite.
In case of liquid from battery getting into your eyes or in contact with your skin, flush with clean water
immediately and seek medical help. Otherwise, this can result in serious injury.
Do not use the battery if it is clearly damaged, it can result in its destruction.
Do not attempt to deform or otherwise tamper with the battery.
Do not attempt to solder a direct connection of battery and cables, it could result in cracks or ignition of
the battery.
Do not use the battery near fire or source of direct heat, do not throw the battery into fire, as this can
cause cracks or ignition of the battery.
Do not expose the battery to shocks or vibration.
Do not insert metal objects into the power outlet, as this could cause short-circuit, overheating, crack or
ignition of the battery.
KEEP the charger away from children and animals.
Charging:
The battery is the most expensive part of an electric bicycle; therefore, pay increased attention during
handling, charging and storage. The battery is sensitive to precise charging. Therefore, it is necessary to
charge Li-Ion rechargeable batteries using only a charger supplied by us. Connect the charger to 220-240 V
power outlet. 5A protected circuit is sufficient. The charger will automatically suspend charging when full
capacity of all cells is reached.
We recommend discharging the battery in full after each ride to ensure that your battery will be up to its
full capacity for your next ride. Charging the battery may last 1 to 5 hours depending on the condition of
the battery cells. Charge it exclusively in covered dry areas (moisture and dripping water can damage the
charger) at a temperature of 5 to 40°C.
The charging process is indicated by a red glowing LED. It will turn green when the battery is charged and
the charging process is complete. The battery contains a charge-monitoring indicator (when the charge
indicator button is pressed, the light indicator will come on). Always switch off the battery when finished
riding the bike.
Normal battery behaviour:
If the motor stops running smoothly and switches to intermittent operation, it could be a sign of low
battery capacity. In that case switch off the electric drive system and continue without motor assistance,
as if riding a conventional bicycle.
Publicité
Table des Matières
