Controls And Adjustments - CHICAGO 94245 Mode D'emploi

When unpacking, check to make sure that the following parts are included: Circular Saw,
Hex Wrench, and Guide Fence. Refer to the Assembly section, and the Assembly Drawing
and Parts List at the end of this manual. If any parts are missing or broken, please call
Harbor Freight Tools at the number on the cover of this manual as soon as possible.
CAUTION: Always make sure the Power Cord is unplugged from its electrical outlet
prior to making any adjustments to the tool.
1. To adjust the angle of blade from 0 to 45 degrees, loosen Wing Nut (10) and move
Base Plate (4) down, observing the degrees indicated on the Angle Bracket (6).
Tighten Wing Nut (10).
2. To adjust the depth of the cut, lift Depth Lever (38) and move Base Plate (4) down (or
up) while observing the amount of saw blade exposed under Base Plate. Push down
on the Depth Lever (38) to lock in new depth setting.
Handle Grip
Depth Lever (38)
SKU 94245
All manuals and user guides at all-guides.com
UNPACKING
OPERATING INSTRUCTIONS
Adjusting the Saw Prior to Cutting

Controls and Adjustments

Angle Adjust
Wing Nut (10)
For technical questions, please call 1-800-444-3353
Switch (61) Trigger Switch Lock Button
Base Plate (4)
English
Page 10