Fellowes POWERSHRED 99Ci Mode D'emploi page 6

PRODUCT MAINTENANCE
OILING SHREDDER
recommend you oil your shredder each time you empty your waste bin.
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
2
1
*Apply oil across entry
Press and hold forward ( )
*Only use a non-aerosol vegetable oil in long
nozzle container such as Fellowes 35250
TROUBLESHOOTING
A B
JAM PROOF SYSTEM*
Eliminates paper jams and powers through tough jobs
DISABLING THE FEATURE
1
Should you choose to disable the
Auto light is no longer
button (blue) and reverse ( )
repeat step 1)
4
All manuals and user guides at all-guides.com
C D E
2
3
AUTO
Shredding can continue with the
and Remove Paper icon (
will illuminate
CLEANING AUTO-START INFRARED SENSORS
TO CLEAN THE SENSORS
2
1
Turn off and unplug
shredder
infared sensor
A. Overheat Indicator:
operating temperature and needs to cool down. This indicator will remain illuminated and the shredder will
not operate for the duration of the recovery time. See Basic Shredding Operation for more information about
the continuous operation and recovery time for this shredder.
B. Bin Open: The shredder will not run if the bin is open.
C. Bin Full:
Use Fellowes waste bag 36053.
D. Remove Paper:
E. SafeSense ® Indicator:
and the shredder will stop shredding. If SafeSense
turn off and the user must press the power button on the control panel to resume shredding.
5 3 4
document is completely through
) the shredder
.
3
Dip cotton swab in
rubbing alcohol
) and remove paper.
® indicator will illuminate
®
5 3 5
6
If steps 4 and 5 do not clear
( ) briefly (repeat steps
4 and 5 until shredded)
and refeed
ENGLISH
Model 99Ci
4
away any contamination
from the paper sensors