MN008918A01-AA
Chapter 2 : Operating Instructions
Chapter 2
Operating Instructions
This section provides guidelines on how to use your Remote Speaker Microphone.
2.1
Attaching the Remote Speaker Microphone (RSM) to the Radio
Prerequisites: Turn off your radio.
When and where to use:
Procedure:
1 Attach the RSM connector to the side connector of the radio.
2 Secure the connection screw in a clockwise direction until tightened.
NOTE: To ensure proper operation, turn off the radio before connecting the RSM to the
radio. Connecting the RSM to the radio disables the speaker of the radio, but does not
disable the microphone and PTT of the radio.
2.2
Attaching Swivel Belt Loop
Procedure:
1 Match and align the arrowhead icons and side wings.
2 Push down the top of the clip.
3 Simultaneously, push slide clip upward.
12
1
2
3