Key Functions; Operation Procedures - Sunny SF-B1203 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EXERCISE COMPUTER
SPECIFICATIONS:
TIME --------------------------------------------------------- 00:00~99:59 MIN: SEC
SPEED ------------------------------------------------------ 0.0~999.9 ML (Miles) /H
DISTANCE ------------------------------------------------- 0.00~99.99 ML(Miles)
CALORIES ------------------------------------------------- 0.0~999.9 KCAL

KEY FUNCTIONS:

MODE: Press to select function. (Time, Speed, Distance, Calories).
Press and hold the MODE button for 3 seconds to reset Time, Distance and Calories.

OPERATION PROCEDURES:

AUTO ON/OFF:
When wheels are set in motion or MODE button is pressed, the computer will turn on. After
approximately 4 minutes of inactivity, the power (computer) will turn off automatically.
RESET:
The computer can be reset by pressing and holding MODE button for 3 seconds. Remove the
batteries will also reset the computer and return all function settings back to zero.
MODE:
To select the LOCK MODE setting, press MODE button until the pointer begins to flash at the function
you wish to select. Once locked, only the selected function will be displayed.
FUNCTIONS:
TIME: Counts the total time of an exercise from start to finish.
SPEED: Displays the current speed being obtained.
DISTANCE: Counts the total distance of an exercise from start to finish.
CALORIES: Counts the amount of total calories burned during an exercise from start to finish.
SCAN: Automatically displays functions in the following order shown: Time, Speed, Distance,
Calories (repeat).
BATTERY: This computer uses two AA batteries. If the display appears improper or becomes difficult
to read, please try installing new batteries before attempting to contact. Always change both batteries
at the same time. Do not mix battery types and do not mix old and new batteries. Dispose the
batteries according to your state and regional guidelines.
13

Publicité

Table des Matières
loading

Table des Matières