Sunny SF-B1203 Mode D'emploi page 11

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1- 877 - 90SUNNY (877-
907-8669).
#28 GB/T 70.2-2000 M8*15 8pcs
#27 GB/T 859-1987 8 4pcs
#19 GB/T 95-2002 8 6pcs
#29 φ8 2pcs
#86 6＃(86X35) 1pc
STEP 3:
Connect the Sensor Wire (No. 76) and bottom end
of Sensor Wire (No. 77).
Remove 4 Bolts (No. 28), 2 Arc Washers (No. 29)
and 2 Flat Washers (No. 19) from the bottom end
of Front Post (No. 6), using Inner Hexagon
Spanner (No. 86) .
Then, attach Front Post (No. 6) to Main Frame
(No. 1) with 4 Bolts (No. 28), 2 Arc Washers (No.
29), and 2 Flat Washers (No. 19) that were
removed. Tighten and secure using Inner Hexagon
Spanner (No. 86).
Remove 4 Bolts (No. 28), 4 Spring Washers (No.
27), and 4 Flat Washers (No. 19) from the top end
of Front Post (No. 6).
Attach Handlebar (No. 7) onto Front Post (No. 6)
with 4 Bolts (No. 28), 4 Spring Washers (No. 27)
and 4 Flat Washers (No. 19) that were removed.
Tighten and secure using Inner Hexagon Spanner
(No. 86).
Attach Computer (No. 12) onto Handlebar (No. 7),
then connect the link wire of Computer (No. 12)
and Sensor Wire (No. 77).
10