Parts And Components; Before Use; Product Installation - cecotec GrandHeat 2000 Manuel D'instructions

1. PARTS AND COMPONENTS

Fig. 1.
1. Control panel
2. Glass tray shaft
3. Glass tray ring assembly
4. Glass tray
5. View window
6. Door
7. Safety lock system
8. Grill rack (Only suitable for Grill function, must be placed on the glass tray)
Control panel
Fig. 12

2. BEFORE USE

Take the product out of the box. If the microwave has a protective film, tear it off before
starting operation. Check carefully if there is any damage, and if there is, immediately notify
the Technical Support Service.
The product must be placed on a flat, stable and dry place and kept away from corrosive
materials, heat and humidity, such as gas burners or water.
The product must be placed in such way that the plug is accessible and must ensure an
effective grounding in case of leakage in order to avoid electric shocks.
The microwave door must be closed in order to operate.
In case there is any manufacturing rests in the microwave cavity or on the heating elements,
leave the microwave open to ensure good ventilation. In such case, it is recommended to heat
a glass of water at high power for several times.
Warning: Do not remove the mica cover that is attached to the microwave cavity to protect the
magnetron.

3. PRODUCT INSTALLATION

Glass tray installation
Fig. 2.
1. Hub
2. Glass tray
3. Glass tray shaft
4. Glass tray ring assembly
When installing the glass tray:
GRANDHEAT 2500 BUILT-IN TOUCH STEEL BLACK
ENGLISH
55