Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
•
Always keep the volume low enough to hear outside sounds.
•
This product is evaluated in moderate and tropical climate condition under the
Audio, video and similar electronic apparatus - Safety requirements, EN62368-1
If you experience problems
Should this unit fail to work properly, please contact your dealer or nearest
authorized PIONEER Service Station
Quick Installation Guide
1.
The antenna should be mounted vertically along the A-Pillar as
indicated in the diagram. ATTENTION! Correct antenna installation
is important for good DAB+ reception.
Min. 2 cm
clearance
2.
Gently lower the car roof liner with the help of the provided
installation tool, insert the magnetic grounding tap and ensure
the magnetic tap contacts to the metal roof of the car. Since it is
magnetic, it should ''click'' into place. Make sure the magnetic
grounding tap is straight after attaching it to the roof of the car.
3.
Ensure the windshield is clean and dry before attaching the
antenna on the glass. Do not stick down the antenna
before you are sure that the glass lets the signal through,
and where you stick it, make sure the antenna film does
not overlap with the heating wires, which will affect the
reception performance.
4.
Now remove the adhesive backing from the antenna
amplifier box and stick to the dry windshield glass, gently
applying pressure to remove any air bubbles.
5.
Install the antenna cable behind the A-Pillar with the help
of installation tool and connect it to Pioneer SDA-11DAB
Page 6
Publicité
Table des Matières
