Setting The Color Gamut; Using The 3D Function - Samsung 7 Serie Manuel D'utilisation

Masquer les pouces Voir aussi pour 7 Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Setting the Color Gamut

You can choose your favorite color gamut. Color gamut means a color matrix made up
with the basic colors of Red, Green and Blue.
1
Follow the Activating Picture Options instructions numbers 1 and 2.
(Refer to page 27)

Press the ▲ or ▼ button to select Color Gamut, then press the ENTER button.

Press the ▲ or ▼ button to select Wide, Normal, or sRGB, then press the ENTER button.
Press the EXIT button to exit.
 Wide: Displays the native color gamut of panel device.
 Normal: Normal Color Gamut offers flat and natural color tone.
 sRGB: Supports color tone of sRGB format.
Using the D Function
You can enjoy D movies and games on your TV. The D effects function enables you to view D images using special D
glasses.
D Glasses
(Not supplied)
※ The appearance of the 3D glasses (including Emitter) may differ depending on the model of your glasses.
1
Connect a HDMI/DVI cable between the HDMI3/DVI jack on the TV and the PC output jack on your computer.

Connect a 3.5mm Stereo/2RCA cable between the DVI IN (HDMI3/DVI) [RAUDIO-L] jack on the TV and the Audio
Out jack of the sound card on your computer.

Connect the Emitter to the 3D SYNC OUT port on the rear panel of the TV.

Turn the TV on and set the source of the TV to HDMI3/DVI.
For more information on the 3D glasses (including the Emitter), refer to the user manual of your 3D glasses.
Adjust the PC resolution:
3D Effect Mode is only available in HDMI3/DVI input signal(640x480@60Hz, 800x600@60Hz,1024x768@60Hz,1280x
720@60Hz,1280 x1024@60Hz, 1360x768@60Hz or 1920x1080p@60Hz).
The 3D IR Emitter communicates with the 3D glasses.
Therefore, the 3D IR Emitter should be located near the 3D glasses.
It is activated when the HDMI or DVI input signal is RGB, and DVI Sound is supported.
When the power is turned on or off, the mode changes to the default (Off) and the Format is saved.
The D Effect is turned on or off regardless of the Picture Mode.
When D Effect is on, only the Contrast, Brightness, 3D Effect,Position, and Reset picture menus are activated.
To use the 3D Effect function, a graphics card supporting 3D or 3D software is required.
D IR Emitter
(Not supplied)
PC
HDMI/DVI Cable (Not supplied)
English - 
Picture Options
Digital NR
: Auto
DNle
: Off
HDMI Black Level
: Normal
Film Mode
: Off
Blue Only Mode
: Off
Color Gamut
: Wide
3D Effect
: Off
Move
Picture Options
Digital NR
: Auto
DNle
: Off
HDMI Black Level
: Normal
Film Mode
: Off
Wide
Blue Only Mode
: Off
Normal
Color Gamut
: Wide
sRGB
3D Effect
: Off
Move
TV Side Panel
Enter
Return
Enter
Return
Continued...

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

750 serieHl61a750a1fHl67a750a1f

Table des Matières