RiverRidge Home 06-164 Instructions D'assemblage page 10

STEP 5
1. Attach plastic door pad (L) to top board (1) by inserting 2 screws (E) through holes on
plastic door pad (L), then tighten to top board (1).
2. Insert 6 wood dowels (A) into wood dowel holes on top board (1).
3. Attach top board (1) to left side panel (2), right side panel (3) and cross bar (6) by inserting
wood dowels (A) into wood dowel holes and inserting cam bolts (B) into cam lock holes on
left side panel (2), right side panel (3) and cross bar (6).
4. Insert 2 cam locks (D) into cam lock holes on left side panel (2) and right side
panel (3), then rotate clockwise to secure cam bolts (B) in place.
STEP 6
1. Attach upper back board (10), middle back board (11) and lower back board (8) to back of
cabinet by inserting 28 screws (J) through holes on upper back board (10), middle back
board (11) and lower back board (8), then tighten to back of cabinet.
J
J
J
J J
J J
J
J
J
J
J
J
J
J
J
J
10
11
J
8
J J
J
J
J
J
J
J