Honeywell Home HPZC10 Serie Mode D'emploi page 2

HPZC10*
MOUNTING
Hang Hole Flow
1. Hang the panel on a wall-mounted screw.
2. Level the panel.
3. Put the 2 bottom screws in.
33-00360EF—08
M37083A
Fig. 1.
M37084A
Fig. 2.
M37085A
Fig. 3.
Din Rail Flow
1. Mount the DIN rail as specified by DIN rail manufac-
turer.
2. Hang panel by the tabs on the rail's top edge.
3. Snap into rail by pressing the bottom of panel
against the wall.
4. To remove, lift up on panel and pull the top away
from the wall.
2
M37086A
Fig. 4.
M37087A
Fig. 5.
M37088A
Fig. 6.
M37089A
Fig. 7.