Honeywell Home HPZC10 Serie Mode D'emploi

HPZC10*
HYDRONIC PRO ZONE VALVE CONTROL PANEL
HPSR106 6-ZONE VALVE CONTROLLER
Zone 1
T-stat Call
Valve Open
DHW
Priority
PANEL SPECIFICATIONS
Model Zones Transformers
HPZC103 3 (1) 24V 40VA
HPZC104 4 (1) 24V 40VA
HPZC105 5 (2) 24V 40VA
HPZC106 6 (2) 24V 40VA
1
Each transformer is protected with a 2 Amp replaceable fuse.
2
Transformers have a Class 2 output and are rated for 24V, 40VA at 25 °C. It is up to the installer to ensure that the 40VA
transformer rating is not exceeded.
3
All circulator relay connections are rated for 5A full load and 30A locked rotor (1/6 to 1/2HP depending on technology)
at 120VAC. Check circulator plate ratings to ensure full load current is not exceeded.
2 3 4 5 6
Power
Boiler
End Switch
Electrical
Rating for
Main Burner,
End Switch
Burner, and
Input
1
Power Zones
120VAC, 24V, 1 A
60Hz, 1
120VAC, 24V, 1 A
60Hz, 1
120VAC, 24V, 1 A
60Hz, 1
120VAC, 24V, 1 A
60Hz, 1
INSTALLATION INSTRUCTIONS
WHAT'S IN THE BOX?
• Hydronic Zone Panel
• Mounting Hardware (3 Screws and 3 Wall Anchors)
• 2, 2-Amp Fuses
• Install Manuals (English & French)
CAUTION
1. Disconnect power supply before beginning
installation to prevent electrical shock or
equipment damage.
2. Use copper conductors only.
3. Use only NEC Class 1 wire for all line voltage
wiring connections. Class 1 wires must be
rated for at least 167 °F (75 °C).
4. For installation by professionals only.
Table 1.
Electrical
Rating for
Pump End
Switch and
2 3
Priority Pump
120 VAC
5FLA, 30LRA
120 VAC
5FLA, 30LRA
120 VAC
5FLA, 30LRA
120 VAC
5FLA, 30LRA
Type 1 Enclosure
Priority
Zone
Control Width Height Depth
Yes 10-1/4" 7-1/2"
Yes 10-1/4" 7-1/2"
Yes 11-3/4" 7-1/2"
Yes 11-3/4" 7-1/2"
33-00360EF-08
2-1/8"
2-1/8"
2-1/8"
2-1/8"