18. Power Output
All values are in WATTS. Measurements were made at the 0.1% distortion point.
Some CONTINUOUS AVERAGE POWER measurements required line currents
greater than 15 Amps. The BURST measurements use a 10 mS burst at 1KHz with a
1/8 second pause between bursts. The 1KHz burst represents the maximum possible
sine wave output power.
Coninuous Average Power @ 8 ohms BCD (Watts)
Coninuous Average Power @ 4 ohms BCD (Watts)
Coninuous Average Power @ 2 ohms BCD (Watts)
Continuous Average Power Bridged BCD (Watts)
Burst Average Power @ 8 ohms BCD (Watts)
Burst Average Power @ 4 ohms BCD (Watts)
Burst Average Power @ 2 ohms BCD (Watts)
Burst Average Power Bridged BCD (Watts)
Frequency Response (Hz, +/- 1dB)
Hum and Noise (un / Aweighted -dB)
Damping Factor (30 Hz - 400 Hz @ 8 ohms)
Crosstalk (1kHz / 20Hz-20kHz)
Input Impedance - Bal/Unbal (ohms)
Input Sensitivity (Vrms) For Full Power Out
Stereo / Mono / Bridge (S/M/B)
Power Consumption (typ/max)
Dimensions (DWH /D fm ears, inches)
Dimensions (DWH /D fm ears, cm)
Specifications
750(x2)
1200(x2)
NA
2400 @ 8 ohms
1200(x2)
2175(x2)
NA
4350 @ 8 ohms
20-20,000
-103
less than 0.01%
THD -1kHz- 4 ohms
less than 0.1%
THD - 20Hz-20kHz, 4 ohms
25
Slew Rate (V/uS)
50
Slew Rate Bridged (V/uS)
greater than 600
-75 / -60 dB
20,000/10,000
1.4 V
41
Max Voltage Gain (dB)
48/56 dB
CMRR @ 60Hz (min/typ)
S/M/B
DC, Load, Thermal
Protection
User Defeatable Peak Limiter
Limiter
Yes
High Pass Filter
Variable speed DC Fan
Cooling
Front to Back
Cooling Path
User Serviceable
Fan Filter
2
Inputs - XLR
2
Inputs - 1/4 -inch Jacks
2
Outputs - Speakon 4-pin
2
Outputs - Binding Post
1800/3000
2
Rack Spaces
High Frequency Switch Mode
Transformer Type
Baked, Black Painted
Exterior Finish
17.8 x 19 x 3.5
45.2 x 48.2 x 8.9
25 / 11.4
Weight (lbs / kg)
4