Guardian Fall Protection 3-Way SRL Manuel D'instructions page 7

4. Install 3-Way SRL on Mounting Bracket as indicated below.
5. To switch 3-Way SRL to rescue/retrieval mode, pull and hold Winch Locking Pin, then move handle back and
forth until Plunger Pin releases out, and release Winch Locking Pin.
6. To switch 3-Way SRL to standard SRL mode, pull and hold Winch Locking Pin, then compress Plunger
Pin, and release Winch Locking Pin. Ensure Plunger Pin remains down and locked in place.
7. To lower cable, rotate Winch Handle counter-clockwise. To raise cable, rotate Winch Handle clockwise.
8. RESCUE/RETRIEVAL MODE FOR EMERGENCY USE ONLY. DO NOT USE 3-WAY SRL FOR ROUTINE HOISTING OF
PERSONNEL OR MATERIALS.
Plunger Pin
Pull Winch
Locking Pin
6