Installation And Use - Guardian Fall Protection 3-Way SRL Manuel D'instructions

Installation and Use

1. With compatible carabiner, attach 3-Way SRL to anchor point at or above harness dorsal D-ring, OR attach to
compatible tripod with Mounting Bracket part #10983.
2. If being used in combination with Arc-O-Pod or other compatible tripod, completely assemble, install, and
use tripod according to manufacturer's instructions provided with tripod at time of shipment. TRIPOD MUST
HAVE INTEGRAL PULLEY.
3. If being used in combination with tripod, install Mounting Bracket on tripod leg:
a) Place Mounting Bracket over leg as shown, so 3-Way SRL snap hook will face up towards tripod pulley;
b) Select desired height of 3-Way SRL on tripod leg, and place Mounting Bracket at selected location;
c) Install (2) provided Locking Pins through Mounting Bracket and tripod leg as shown;
d) Secure Locking Pins with connected hitch pins, and ensure Mounting Bracket is fully secured to tripod leg.
3-Way SRL Swivel
Eye attached to
install location on
Mounting Bracket.
5
Shoulder Bolt
inserted through
Mounting Bracket
and 3-Way SRL,
and secured with
hitch pin.
Locking Pins
inserted through
Mounting Bracket
and tripod leg,
and secured
with hitch pins.