Important - Power Dynamics PDC-35 Manuel D'instructions

IMPORTANT

Use of controls or adjustments or performance of procedures other than those specified here in may
result in hazardous radiation exposure.
CD player Function:
1. EJECT BUTTON
Press to load or eject disk. Each press will open or close the disk tray.
NOTE: Disc holder will not open unless stop or pause button has been pushed first.
2. PLAY/PAUSE BUTTON
Each time you press the PLAY/PAUSE button, the operation changes from play to pause or
from pause to play.
3. CUE BUTTON
Pressing the CUE button during play provides a return to the position at which play was started.
4. CD/USB BUTTON
Pressing the CUE button during play provides a return to the position at which play was started.
5. TIME BUTTON
Used this button to choose the time mode: Elapsed time, remaining time or total remaining time.
6. REPEAT BUTTON
Us Use this button to repeat one track or all the track of the CD
7. RELOOP BUTTON
This button is used to start the last saved loop. To finish the loop, press the reloop button.
8. IN BUTTON
This button sets the beginning of the loop. The Loop indicator on the display flashes.
9. OUT BUTTON
When you press this button, you set the end point of the seamless loop and you start the loop.
To finish the loop, press again this button.
10. CONT. / SINGLE BUTTON
Press this button to switch between the SINGLE and CONTINUOUS play mode. The selected
mode is indicated on the LCD. In SINGLE mode, after each track, the unit stops the reading. In
CONTINUOUS mode, the unit reads all tracks and stops.
11. PROG AND FOLDER CONERSION BUTTON
In STOP mode, you can program several tracks (20 tracks max):
Press the STOP button to enter in the stop mode
Press the PROG button to enter in the program mode
Use the skip track buttons to choose the track you want to listen then press the PROG button to
enter your choice.
Use one more time the skip track buttons to choose the track you want to listen then press the
PROG button to enter your choice.
Repeat the operation to select all the track you want to listen
Press the play/pause button to start the playback
12. +10 BUTTON
Use this button to jump of 10 tracks in one press.
13. SKIP I<< BUTTON
Use this switch to restart the track or to select the last track.
14. SKIP >>I BUTTON
Use this button to select the next track.
15. FOLDER BUTTON
Allows you to navigate through folders similarly in either USB or CD mode.
16. BUTTON
For selecting random play. With the function activated, the LCD will light up.
17. PITCH BEND-BUTTON
The pitch will drop while the button is pressed and return to the original pitch when it is released.
18. PITCH BEND+BUTTON
5