Audizio Prato 102.215 Manuel D'instructions page 11

Switch from DAB+ mode to FM mode by pressing the function button and selecting FM or by pressing the DAB/FM button on
the remote control. The display will show the frequency.
Automatic station search
Press the [SCAN] button on the remote control or [PLAY/PAUSE] button on the radio to start the automatic station search.
When a station is found, the scan stops automatically.
Manual station search
Press the [PREV/NEXT] buttons to manually select a station.
Set whether you want to search all stations or only those with a strong signal.
1. Press the [MENU] button on the remote control and select "Scan Settings" using the [
2. Select "All Stations" with the [
channel scan or select "Strong Stations Only" and confirm with [ENTER] if you want to include only strong stations in the
channel scan.
The radio automatically switches between stereo and mono, but you can manually set whether you want to listen to the radio
in stereo or mono.
1. Press the [MENU] button on the remote control and select "Audio Settings" using the [
[ENTER]-button.
2. Select Stereo or Mono mode using the [
You can store up to 20 stations, 10 stations in DAB+ mode and 10 stations in FM mode.
1. Set the desired station.
2. Press the [MEMORY] button for about 3 seconds.
3. Use [PRESET] buttons to select the number where you want to store the station and press [ENTER] button to confirm.
4. Confirmation appears on the display.
5. Once a station has been stored, you can recall the station by pressing the "Memory" button.
6. Use the [PRESET] buttons to scroll through the preset stations and press the [ENTER] button to select the desired station.
Press the [INFO] button on the remote control. The following information appears in succession on the display:
Radio text
Program Type
Frequency
Audio-Type
Time/Date
Switch the CD mode by pressing the [FUNCTION] button to select CD or by pressing the [CD/USB] button on the remote
control. In CD mode, you can read CDs, CD-Rs, CD-RWs and 8cms.
1. Press the [EJECT] button to open the CD tray and insert a CD.
2. Press the [EJECT] button to close the CD tray.
3. If there is no CD in the CD compartment or the CD cannot be read, "No Disc" or "Unknown Disc" appears on the display.
4. When the CD is being read, the track number appears on the display.
1. Press the [PLAY/PAUSE] key to play the first song.
2. Press the [PLAY/PAUSE] key to pause a CD.
3. Press the [STOP] button to stop playback.
4. To skip a track, press the [
5. To return to a previous track, press the [
Repeat numbers
1. To repeat a track, press the [REPEAT] button on the remote control. You can select whether to repeat only one track or all
tracks on the CD. Select "REP_ONE" or "REP_ALL".
2. Press the [REPEAT] button again to deactivate the function.
] or [ ]-buttons and confirm with [ENTER] key if you want to include all stations in the
] or [
The display shows an indicator showing the signal strength.
The style or genre of the program is displayed.
The frequency is displayed.
The display indicates whether the station is playing in stereo or monaural.
The current date and time are shown on the display.
] key.
] key.
]-buttons and confirm with [ENTER].
11
] of [ ]-buttons.
] or [ ]-buttons. Confirm with