Remote Control - Rowenta TURBO SILENCE Notice D'utilisation

6 – OPERATION
CAUTION : Do not try to raise the button (E) when the appliance is in use, as you could damage the os-
cillation mechanism.
When you switch the appliance on (plugged into the mains socket), the appliance is
in "STAND BY" Mode (STOP).The electricity consumption is less than 0.5W.
Operate the fan using the ON / STAND BY button (A).
Then choose the speed you require by pressing once, twice or three times on the se-
lection +/- button (B).
B
For high performance ventilation, press directly on theTURBO BOOST (C) button
C which will light up in blue.
You can stop the fan by using the ON / STAND BY (A) button.
A
IMPORTANT: We advise you to unplug your appliance when you are not using it.

7 - REMOTE CONTROL

Remote control description:
• Button A: ON/STAND BY
• Button B: speed selector 1 / 2 or 3
• Button C: 4th speedTURBO BOOST selector
Using the remote control:
• Press once on the A button, the appliance starts on the last speed selected before
STANDBY, then press again on button
A: the appliance stops (STANDBY mode).
• Buttons B and C will only work once the appliance is running:
• Press repeatedly on button B to switch from the different speeds from 1 to 3.
• Press on button C to enable/disable theTURBO BOOST speed.
How the remote control works:
The information is transmitted to your appliance by infra-red by means of a transmitter diode located
on the front of the remote control.The infra-red receiver is located on the fan's control panel.
Make sure you don't scratch the transmitter diode or your fan's infra-red receiver.
To use the remote control, point the transmitter diode in the direction of the fan's infra-red receiver and
press on the required button.
Make sure that there aren't any obstacles between the transmitter diode and the receiver.
Remote control power supply:
The remote control uses 2 x 1.5 V type AAA or LR03 alkaline batteries, which are not included.
Place the batteries in their compartment making sure that you put them in with the positive and nega-
tive ends the right way round as shown in the battery compartment.
IMPORTANT: We advise you to unplug your appliance when it is not in use.
When storing the appliance for a longer period of time, please remove the batteries from the remote
control.
1
3
2
E E
EN
2
1