HP OneLam Combo A3 Mode D'emploi page 21

Î The laminating pouch is drawn in and discharged on the output side (front) of the lamina-
tor.
Caution!
Risk of burns through hot laminating pouch.
When the laminating pouch is ejected after lamination, it is extremely hot. Only remove
the ejected lamination pouch holding it at the cooled end.
4
Remove the laminating pouch from the device.
5
Switch the power switch to OFF.
Î The lamination process has been completed.
Caution!
Risk of burns through hot machine surface!
Wait a few minutes after switching off until the laminator has cooled down before you
touch it.
Ending Operation of the Laminator
Switch the laminator off when you want to stop using the laminator.
1
Switch the power switch to OFF.
2
Disconnect the power plug from the power socket.
3
Disconnect the power cable from the socket.
Î Operation of the laminator has been ended.
A3 A4 A5 A6
OneLam
Combo A3
- 21 -
A6 A5 A4 A3
EN