Connecting Speaker Cables; Bare Wire Connection; Single Wire; Banana Plugs - Monitor Audio Silver Serie Manuel Utilisateur

Connecting Speaker Cables

Bare Wire Connection

Unscrew the binding posts and pass
the bare wire through the through-hole
and tighten the binding post to clamp
the wire in place.

Single Wire

Connect the banana plugs/ bare wire to
the terminals. Connect to either the top,
bottom or diagonally (experimentation
is advisable to achieve the preferred
results).
Leave the terminal links in
place.
10
All manuals and user guides at all-guides.com
Silver Series

Banana Plugs

Remove the red and black plastic plugs
from the terminals and insert the banana
plugs into the holes that are revealed.
A knife blade of flat blade screwdriver
may be required to gain purchase on
the plugs.

Bi-Wire/ Bi-Amp

Connect the banana plugs/ bare wire to
the top and bottom terminals (positive
to positive and negative to negative).
The terminal links MUST be
removed.