Event Log Messages - RISCO Group SMPS Guide D'installation

Function
SMPS
Diagnostics
NOTE:
The diagnostic features can be also performed from the separately provided
Upload/Download software, locally or remotely.

Event Log Messages

The following list details SMPS dedicated event messages, as displayed on
the keypad LCD:
Event Message
S=X OVER. RC=YY
POT.OVRLOAD PS=X
POT.LOAD RS PS=X
OVERLOAD PS=X
OVERLOAD RS PS=X
WEAK BAT RS PS=X
WEAK BAT RS PS=X
14
Quick Key
[4] [Installer
CODE] [#]
[9] [2]
Meaning
Overload in SMPS X. Reset by user YY
Potential overload of SMPS joined by SMPS ID
(1-8)=X
Potential overload restore from SMPS, joined by the
SMPS ID (1-8)=X
Overload from SMPS joined by the SMPS ID =X
Overload restore from SMPS, joined by SMPS ID
(1-8)=X
Weak Bat indication, joined by the SMPS ID (1-8)=X
Weak Bat restore from SMPS joined by SMPS ID
(1-8)=X
SMPS - Installation Guide
Description
Battery Voltage (of pre-selected SMPS);
tests battery voltage.
Auxiliary load (of relevant SMPS): real
time Aux output voltage and current of
SMPS. SMPS Aux Output voltage &
current are displayed on the LCD keypad.
Bell Load (of relevant SMPS); displays the
Bell current consumption. The SMPS
checks the bell load at each bell operation.
The last measured data is displayed on the
LCD keypad.