Télécharger Imprimer la page

Noco BOOST X Mode D'emploi page 4

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
the product before attempting any maintenance or cleaning. Clean and dry product immediately if it comes in contact with liquid or any type of contaminant. Use a
soft, lint-free (microfiber) cloth. Avoid getting moisture in openings. Explosive Atmospheres. Obey all signs and instructions. Do not operate product in any area
with a potentially explosive atmosphere, including fueling areas or areas which contain chemicals or particles such as grain, dust or metal powders. High-
Consequence Activities. This product is not intended for use where the failure of the product could lead to injury, death or severe environmental damage. Radio
Frequency Interference. Product is designed, tested, and manufactured to comply with regulations governing radio frequency emissions. Such emissions from
the product can negatively affect the operation of other electronic equipment, causing them to malfunction. Model Number: GBX45 This device complies with
Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
How To Use
Step 1: Charge the GBX45
The GBX45 comes partially charged out of the box and needs to be fully charged prior to use. Connect the GBX45
using the included USB-C Charge Cable to the USB-C IN/OUT port. It can be recharged from any powered USB port,
like an AC adapter, car charger, laptop and more. The USB-C IN/OUT port utilizes Power Delivery 3.0 technology
capable of receiving/delivering up to 60W. The time to recharge a GBX45 will differ based on the discharge level and
the power source used. Actual results may vary due to battery conditions.
When recharging, the charge level of the internal battery is indicated by the charge LEDs. The LEDs will slowly pulse
'on' and 'off' and become solid until all four charge LEDs are on. When the battery is fully charged, the green 100%
LED will be solid, and the 25%, 50% and 75% charge LEDs will turn «off». From time to time, the green 100% LED
will pulse indicating maintenance charging is occuring.
Recharge Time: Charger Rating:
16h
2.5W
8h
5W
4h
10W
Internal Battery Level
25% 50% 75% 100%

Publicité

loading

Ce manuel est également adapté pour:

Gbx45