Sauder Dakota Pass 420196 Mode D'emploi page 19

Step 15
Gently push the FRONT MOLDING (O) onto the
å
MOLDING CONNECTORS in the FRONT LEGS (I and J).
NOTE: Be sure the CAM SCREWS in the FRONT
å
MOLDING insert into the holes in the edge of the TOP (D).
Fasten the FRONT MOLDING (O) to the TOP (D). Tighten
å
three HIDDEN CAMS.
www.sauder.com/services
I
420196
D
O
You may need to gently tap the
MOLDING CONNECTORS back in
after attaching the FRONT MOLDING.
J
Page 19