Using The Remote Control; Playing Video And Audio Discs - Dynex DX-PDVD9 Guide De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

10

Using the remote control

To use the remote control:
1 The first time you use the remote control, remove the plastic sheet from the bottom of
the battery to activate the remote.
2 To use the remote control, point it at the remote sensor on the player. (Operate in the
range of 10 feet (3.3 meters) and 60° ).
3 Remove the batteries if the remote control will not be used for an extended period of
time.
Tip: Generally, batteries last for about one year. Replace the batteries if the remote control

Playing video and audio discs

Turning on the player
To turn on the player:
1 Open the LCD screen.
2 Turn on the player. The power LED lights green and the LCD screen turns on.
Playing discs
To load and play a disc:
1 Press the OPEN button to open the disc tray.
2 Hold the edges of the disc and place the disc in the center of the tray with the label
side up.
does not work.
Playing video and audio discs
CR2025
Open
Push

Publicité

Table des Matières
loading

Table des Matières