Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3. Hang one end of the support hook onto the mounting
bracket and hang the light fixture on the other end of
the support hook (Fig. 5).
4. Connect fixture black wire to house black wire and
fixture white wire to house white wire by firmly
pushing into quick connect wiring connectors
(Fig. 6).
5. Connect house ground wire and fixture ground wire
by firmly pushing into quick connect wiring
connector. (Fig. 6). Attach fixture (A) to the mounting
bracket (B) using (2) #8 x 1-1/4 in. screws (F)
pre-attached to the canopy. Be sure no loose wires
remain sticking out from underneath the coverplate.
Insert the decorative screw cover caps (G) into the
screw holes on the coverplate for a finished appear-
ance (Fig. 6).
6. Adjust light fixture to desired postion by loosening the lower arm jam nut and the
thumbscrew on the upper arm. Move the head to aim and retighten the thumbscrew and
jam nut.
7. Apply silicone caulk around the edges of the coverplate and jam nuts at the base of the
adjustment arms to provide a watertight seal from rain and moisture.
8. Turn on power at main fuse /breaker box.
6
A
TROUBLESHOOTING
Problem
Cause / Solution
Light does not
No power to the fixture.
come ON.
• Check if circuit breaker tripped.
• Confirm wall switch is ON.
Fixture is sensing daylight.
• Cover light sensor. Unit will switch ON immediately.
TURN OFF POWER BEFORE CONTINUING
Wiring to the unit is loose.
• Confirm wiring is properly secured.
* If light still does not come on after checking wiring
connections, contact Customer Service.
Light cycles
Light sensor is sensing reflected light.
ON and OFF
• Relocate light fixture where it no longer cycles on and off.
continuously.
Light stays ON.
Light sensor is in a shaded area.
• Shine a flashlight into the light sensor. If the light turns off, the
fixture is mounted in an area that does not allow enough light to
enter the light sensor.
If light sensor is not in a shaded area, light sensor could be faulty.
• Contact Customer Service.
5-YEAR LIMITED WARRANTY
THE FOLLOWING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES,
WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING, BUT NOT LIMITED TO, ANY
WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
Cooper Lighting Solutions warrants to customers that, for a period of five years from the date
of purchase,Cooper Lighting Solutions products will be free from defects in materials and
workmanship. The obligation of Cooper Lighting Solutions under this warranty is expressly
limited to the provision of replacement products. This warranty is extended only to the original
purchaser of the product. A purchaser's receipt or other proof of date of original purchase
acceptable to Cooper Lighting Solutions. This is required before warranty performance shall be
rendered. This warranty does not apply to Cooper Lighting Solutions products that have been
altered or repaired that have been subjected to neglect, abuse, misuse or accident (including
shipping damages). This warranty does not apply to products not manufactured by Cooper
Lighting Solutions which have been supplied, installed, and/or used in conjunction with
Cooper Lighting Solutions products. Damage to the product caused by replacement bulbs or
corrosion or discoloration of covered by this warranty.
5
C
Quick Connect
wiring connector
G
LIMITATION OF LIABILITY:
IN NO EVENT SHALL COOPER LIGHTING SOLUTIONS BE LIABLE FOR SPECIAL, INDIRECT,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (REGARDLESS OF THE FORM OF ACTION,
E
WHETHER IN CONTRACT, STRICT LIABILITY, OR IN TORT INCLUD-ING NEGLIGENCE), NOR FOR
LOST PROFITS; NOR SHALL THE LIABILITY OF COOPER LIGHTING SOLUTIONS FOR ANY
CLAIMS OR DAMAGE ARISING OUT OF OR CONNECTED WITH THESE TERMS OR THE
MANUFACTURE, SALE, DELIVERY, USE, MAINTENANCE, REPAIR OR MODIFICATION OF COOPER
LIGHTING SOLUTIONS PRODUCTS, OR SUPPLY OF ANY REPLACEMENT PARTS THEREFORE,
A
EXCEED THE PURCHASE PRICE OF COOPER LIGHTING SOLUTIONS PRODUCTS GIVING RISE TO
A CLAIM. NO LABOR CHARGES WILL BE ACCEPTED TO REMOVE OR INSTALL FIXTURES.
To obtain warranty service, please contact Cooper Lighting Solutions, at 1-800-334-6871,
press option 2 for Customer Service, or via e-mail ConsumerProducts@cooperlighting.com
and include the following information:
• Name, address and telephone number
• Date and place of purchase
• Catalog and quantity purchase
• Detailed description of problem
All returned products must be accompanied by a Return Goods Authorization Number issued
by the Company and must be returned freight prepaid. Any product received without a Return
Goods Authorization Number from the Company will be refused. Cooper Lighting Solutions is
not responsible for merchandise damaged in transit. Repaired or replaced products shall be
subject to the terms of this warranty and are inspected when packed. Evident or concealed
damage that is made in transit should be reported at once to the carrier making the delivery
and a claim filed with them.
Reproductions of this document without prior written approval of Cooper Lighting Solutions are strictly prohibited.
For assistance, call 1-800-334-6871 or e-mail us at ConsumerProducts@cooperlighting.com
Printed in China
Junction
box
FRENCH
B
ARTICLES REQUIS :
(à acheter séparément)
• Tournevis cruciforme
• Calfeutrage en silicone étanche pour l'extérieur
IMPORTANTES INSTRUCTIONS DE SÉCURITÉ
Des précautions de base doivent être suivies lors de l'utilisation de ce produit, incluant :
• Le respect de tous les avertissements incluant les avertissements ci-dessous ET ceux
indiqués sur le produit.
• Conservez ces instructions et ces avertissements.
• Exclusivement réservé à un usage extérieur.
• Homologation cULus pour l'utilisation dans des endroits humides.
• Le démontage de l'appareil annule la garantie.
• L'appareil est câblé et assemblé à l'avance pour faciliter son installation.
AVERTISSEMENT
• Lisez et suivez ces instructions.
• Risque d'incendie ou de décharge électrique. Si vous n'êtes pas qualifié, consultez un
électricien.
• Coupez l'alimentation électrique depuis le fusible ou le disjoncteur avant l'installation
ou l'entretien.
MISE EN GARDE
• Raccordez le luminaire à une source d'alimentation de 120 V, 60 Hz. Tout autre
raccordement annule la garantie.
• L'appareil d'éclairage doit être installé par des personnes ayant l'expérience du
câblage domestique ou par un électricien qualifié. Le système électrique et la méthode
de raccordement électrique de l'appareil d'éclairage doivent être conformes au Code
national de l'électricité et aux codes locaux du bâtiment.
• Appareil d'éclairage destiné à être installé sur un mur ou un avant-toit par fixation
à un boîtier de jonction uniquement. Raccordez l'appareil d'éclairage à un boîtier de
jonction encastré et mis à la terre standard, marqué pour une utilisation dans des
endroits humides.
• Ne pas installer à une hauteur inférieure à 1,52 m (5 pi).
• Ce dispositif est conforme à la section 15 des règlements de la FCC. Son
fonctionnement est assujetti aux deux conditions suivantes : 1) cet appareil ne
doit pas provoquer d'interférences nuisibles et 2) cet appareil doit accepter toutes
les interférences reçues, même celles qui pourraient provoquer un fonctionnement
indésirable.
AVERTISSEMENT : Les réglementations de la FCC mentionnent que toute
modification ou altération apportée à cet équipement n'étant pas expressément
approuvée par le fabricant peut annuler le droit de l'utilisateur à faire
fonctionner cet équipement.
CONSERVEZ CES INSTRUCTIONS.
2
Publicité
Table des Matières
