Table des Matières
Publicité
Recommended Tire Pressure (kilopascals):
Frequently check the tire inflation pressure because all tires lose air slowly over
time. For extended storage, keep the weight of the product off the tires.
Recommended tire pressure is marked on the side of the tire. Conversion from
PSI to Kilopascals is shown here.
Recommended Torque:
Use of a torque wrench is
recommended. Recommended
torque for each fastener is listed
below. In addition to tightening to the
recommended torque, please ensure
the parts of the product are sufficiently
tightened by performing the functional
tests (in the component assembly
sections of the owner's manual) on
each component as it is tightened.
NOTE: Please check that all fasteners
on the product are torqued according to
the table:
30
30
Tire Pressure Table - Torque Chart
(Australia and New Zealand)
Tire Pressure Table
Toque Table
Recommended Torque for clean, dry threads:
Fastener Size
Torque (ft-lb / N•m)
0.157 in (4 mm)
3.1 ft-lbs (4.2 N•m)
0.196 in (5 mm)
5 ft-lbs (6.8 N•m)
0.236 in (6 mm)
0.275 in (7 mm)
12 ft-lbs (16.3 N•m)
0.314 in (8 mm)
17 ft-lbs (23 N•m)
0.393 in (10 mm)
33 ft-lbs (44.7 N•m)
0.472 in (12mm)
39 ft-lbs (52.3 N•m)
Pedals
24 ft-lbs (30 N•m)
Tire Pressure: (PSI to Kpa Conversion)
PSI
20
30
40
50
60
Screw or bolt size is determined
by the width at the THREADS as
7 ft-lb (9.5 N•m)
Kpa
140
210
275
345
415
How to Measure:
shown.
Publicité
Table des Matières
