Operating Instruction 7.1 Vitamat Inox - ROTOR Vitamat INOX RVI Mode D'emploi

© Rotor Lips AG
7.1 OPERATING INSTRUCTIONS VITAMAT INOX
- Place the collecting bowl
Juice outlet on the side of the clamp.
Check:
bolt must engage the groove!
- Place the centrifugal basket on the motor shaft and
rotate it slightly until it locks into place.
- Then central screw in the center of the
basket and tighten it slightly with the box spanner supplied,
supplied with a clockwise rotation.
Never forget the box spanner inside the machine!
- Place the appropriate lid on the collecting bowl.
Pay attention to the correct angular position.
18
Instruction Manual
Rotor Vitamat INOX
Grossküchen- und Bäckereimaschinen
CH-3661 Uetendorf