Echo PW-3100 Manuel D'instructions page 12

When Adjusting or Making Repairs to Your Pressure Washer
• Disconnect the spark plug wire from the spark plug and place the wire where it
cannot contact spark plug.
When Testing for Engine Spark
• Use approved spark plug tester.
• DO NOT check for spark with spark plug removed.
High pressure spray may damage fragile items including glass.
• DO NOT point spray gun at glass when using red 0° spray tip.
• NEVER aim spray gun at plants.
Improper treatment of pressure washer can damage it and shorten its life.
• If you have questions about intended use, contact your nearest authorized dealer,
call our support line, or visit our website.
• NEVER operate units with broken or missing parts, or without protective housing or
covers.
• DO NOT by-pass any safety device on this machine.
• DO NOT tamper with governed speed.
• DO NOT operate pressure washer above rated pressure.
• DO NOT modify pressure washer in any way.
• Before starting pressure washer in cold weather, check all parts of the equipment to
be sure ice has not formed.
• NEVER move machine by pulling on hoses. Use the handle provided on unit's
frame.
• Check fuel system for leaks or signs of deterioration, such as chafed or spongy
hose, loose or missing clamps, and damaged tank or cap.
Correct all defects before operating pressure washer.
12
WARNING
Unintentional sparking can result in fire or electric shock.
NOTICE
NOTICE
SAFETY