SPORTSTECH DESK FIT DFT200 Mode D'emploi page 36

If the surface of the running belt is damaged, please contact our customer service.
We recommend using lubricant between running belt and running deck as per the following schedule:
Easy user
Moderate user
Heavy user
In order to protect your treadmill optimally and prolong its service life, it is recommended to switch it off for
approx. 10 minutes if you do not use it for a while during a session.
ADJUSTING/ALIGNING THE RUNNING SURFACE:
In order to maximise use of the treadmill, it is vital that the running surface is optimally adjusted.
ALIGNMENT:
Place the device on the flat floor. Run the device at medium speed (in the 5. gear). (See the following illustrations)
When the running surface is closer to the left side, turn the left adjusting bolt clockwise with a quarter turn,
using the 6mm hex wrench.
If the running belt is closer to the right side, turn the right adjusting bolt anti-clockwise by a quarter turn,
using the 6mm hex wrench.
Use / Training
less than 3 hours / week
Use / Training
3-5 hours / week
Use / Training
more than 5 hours / week
36
once a year
once every half year
once every quarter