Troubleshooting - KitchenAid KVJ0111 Instructions

CARE AND CLEANING
All parts other than the juicer body are top rack dishwasher safe.
5

TROUBLESHOOTING

Maximum Extr_action Juicer_ does not oper_ate
Juice does not flow sufficiently, or is flowing out of the pulp ejector
Check to see whether the rubber gasket on the bottom of the Juicer is placed properly.
Makes a squeaking or_ clicking noise or_ shakes when making juice
• A squeaking noise is normal. It is the sound
of juice being squeezed by the auger.
18
• Check to see whether the Juicer
is plugged into a grounded 3 prong
outlet. If it is, check the fuse or circuit
breaker on the electrical circuit the
Juicer is connected to and make sure
the circuit is closed.
• Check to make sure the Juicer was
assembled correctly. See "Assembling the
Maximum Extraction Juicer" section.
• Check to see if the screen is clean and
clear of pulp. Too much pulp on the screen
may affect performance, and will need to
be removed. See "Cleaning the Maximum
Extraction Juicer" section.
• The juicer might be jammed. Turn Juicer
off and reverse direction. Turn off Juicer
again, unplug unit, and remove lid to
clean out pulp build up. See "Cleaning the
Maximum Extraction Juicer" section.
If the pr_oblem cannot be cor_r_ected: See
the "Warranty and Service" section. Do not
return the Juicer to the retailer; retailers do
not provide service. The serial number for
service is on the bottom of the Juicer body.
• Some shaking is normal. It is the sign of
the motor working properly.