oneConcept 10006663 Mode D'emploi page 19

Problem Possible Cause
Noise or sound dis- Station not tuned properly.
torted on AM or FM
FM Wire antenna is not extended.
AM or FM no sound Unit not in "RADIO" function mode.
Volume set at minimum
CD player will not Unit not in CD function mode.
play
CD is not loaded properly.
ICD is self-compiled, the media used
may not be compatible with the player.
CD skips Disc is dirty or scratched.
Intermittent sound Dirty or defective disc
from CD player
Dirty pick up lens
Player is subject to excessive shock
or vibration
Sound appears Volume control is set to maximum.
distorted at high
volume levels.
BT can not connect. The System's memory is full
No Alarm Alarm is not activated
Incorrect Alarm time
Troubleshooting
Solution
Retune the broadcast station.
FM: Extend the FM Wire antenna
Slide FUNCTION SELECTOR to RADIO.
Increase Volume.
Select CD function mode.
Load CD with label side up.
Use better quality blank media and
retest.
Wipe CD with clean cloth
Clean or replace the defective disc
Use a CD lens cleaning disc to clean
Relocate the player away
Adjust Volume Control to a lower
comfortable level.
hold PLAY/PAUSE Button two seconds
to clean the memory
Check that Alarm indicator "
appears in the Display.
Make sure AM or PM is set correctly.
"
19